TM   5-2815-241-34&P TURBOCHARGER  -  CONTINUED ACTION LOCATION ITEM REMARKS DISASSEMBLY  -  CONTINUED 5.  Retaining  strap  (1) Two  screws  (2),  four flat  washers  (3), and  two  self-locking nuts  (4) Using   7/16-inch   box-end   wrench,   1/2-inch drive 7/16-inch socket, and ratchet handle, unscrew and take off. Discard  screws,  flat  washers,  and self-lucking   nuts. 6.   Turbocharger   (5) Retaining   strap   (1) Using   16-ounce   ball-peen   hammer,   tap loose and take off. 7. Compressor   housing   a. (6)  and  ST-647 puller  (8) b. Using  ST-647  puller,  take  off  compres- sor  housing  from  shaft  (7). Remove  ST-647  puller. 8.  Compressor housing   (6) 9. Eight  screws  (9) and  eight lockwashers   (10) Diffuser  plate  (11) and  seal  ring  (12) Using   7/16-inch   box-end   wrench,   unscrew and take off. Discard    lockwashers. Using plastic-faced hammer, tap free and remove  sealing  ring  and  impeller  (13). Discard  seal  ring. T A    2 4 2 5 9 7 2-386