TM   5-2815-241-34&P TURBOCHARGER  -  CONTINUED ACTION LOCATION ITEM REMARKS 33. New   bearing Position new bearing insert over shaft to insert  (7) flange on bearing. 34. New   preformed packing  (8) Lubricate  new  packing  with  lubricating  oil and install in groove on compressor end of bearing  housing. 35.  Seal  (9) Piston  ring  (10) Coat  seal  and  piston  ring  with  lubricating  oil and install piston ring on seal. 36.  Diffuser  plate  (11) Seal  (9)  and  piston ring  (10) Install  seal  assembly  from  inside  of  diffuser plate  with  piston  ring  towards  outside  of diffuser  plate. 37. New  seal  ring  (12) Lubricate  new  seal  ring  with  lubricating  oil and install on lip of diffuser plate. 38.  Bearing  housing assembly  (13) Diffuser  plate assembly  (14) Coat  bearing  housing  bore  with  lubricating oil and place diffuser plate over shaft. Aline retainer  on  diffuser  plate  so  that  retainer covers side of bearing flange. T A    2 4 2 6 0 2 2-395