TM    5-2815-241-34&P SECTION  VIII,  PISTONS  AND  CONNECTING  RODS  –  CONTINUED PART  OR  LOCATION NEW NEW MINIMUM MAXIMUM 0.023 (0.58) 0.019 (0.48) 0.028 (0.71) 0.010 (0.25) Piston   Ring (Gap  in  Ring  Travel  Area  of  Liner) Part No. 147670 Part No. 132880 Part No. 168680 Part No. 194610 0.033 (0.85) 0.029 (0.74) 0.038 (0.97) 0.020 (0.51) *  Add  0.003-inch  (0.08  mm)  ring  gap  to  new  maximum  limit  for  0.001  (0.03)  wear  in  cylinder  liner wall. TORQUE  LIMITS  –  FT  LB  (N•M) WORN LIMIT PART  OR  LOCATION MINIMUM MAXIMUM Connecting  Rod  Capscrews Step  1  Tighten  to Step  2  Advance  to Step  3  Loosen  all Step 4 Tighten to Step  5  Advance  to Step  6  Advance  to 70 (95) *140  (190) 25 (34) 70 (95) *140 (190) 75  (102) *150  (203) Completely 30 (41) 75  (102) *150 (203) *  Torque  to  100  ft  lb  (136  N•m)  with  lock  plates. SECTION  IX,  CAMSHAFT  AND  TIMING  SYSTEM WEAR  LIMITS  –  INCH  (MM) PART  OR  LOCATION Camshaft  Journal Outside  Diameter NEW NEW WORN MINIMUM MAXIMUM LIMIT 1.997 1.998 1.996 (50.72) (50.75) (50.70) 2-439