TM   5-2815-241-34&P SECTION  IX,  CAMSHAFT  AND  TIMING  SYSTEM  –  CONTINUED WEAR LIMITS – INCH (MM) – CONTINUED PART  OR  LOCATION Rocker   Arm   Bushing Inside  Diameter Rocker  Arm  Shaft Outside   Diameter Cam Follower Shaft Outside  Diameter Cam  Follower  Bushing Inside  Diameter Injector Cam Roller Inside  Diameter Injector  Cam  Roller Outside  Diameter Valve  Cam  Rollers Inside  Diameter Valve  Cam  Rollers Outside  Diameter Cam Roller Pins Outside  Diameter Push  Rods Ball   End   Radius Push  Rod  Socket Spherical  Inside  Diameter NEW NEW MINIMUM MAXIMUM 1.1245 (28.562) 1.1275 (28.639) 1.123 (28.52) 1.124 (28.55) 0.7485 (19.012) 0.749 (19.02) 0.7495 (19.037) 0.7505 (19.063) 0.503 (12.78) 0.504 (12.80) 1.249 (31.72) 1.251 (31.78) 0.5005 (12.713) 0.5015 (12.738) 1.249 (31.72) 1.250 (31.75) 0.4995 (12.687) 0.500 (12.70) 0.623 (15.82) 0.625 (15.87) 0.505 (12.83) 0.520 (13.21) TORQUE LIMITS – FT LB (N•M) WORN LIMIT 1.1286 (28.664) 1.122 (28.50) 0.748 (19.00) 0.7515 (19.088) 0.505 (12.83) 1.247 (31.67) 0.503 (12.78) 1.247 (31.67) 0.497 (12.62) PART OR LOCATION MINIMUM MAXIMUM Valve  Crosshead  Nuts  Using  ST669  Adapter Rocker  Arm  Housing  Capscrews Rocker Arm Shaft Plugs Straight Tapered 22  (30) 26 (35) 55  (75) 65  (88) 20  (27) 25  (34) 20  (27) 30  (41) 2-440