TM   5-2815-241-34&P SECTION  IX,  CAMSHAFT  AND  TIMING  SYSTEM  –  CONTINUED PART  OR  LOCATION MINIMUM MAXIMUM Cam  Follower  Capscrews 30  (41) 35  (47) SECTION  X,  ENGINE  LUBRICATION  SYSTEM WEAR  LIMITS  –  INCH  (MM) PART  OR  LOCATION Single  Lubricating  Oil  Pump (Double    Capacity) Bushing  Inside  Diameter Drive  Shaft Outside  Diameter Idler   Shaft Outside  Diameter Drive  Gear  to  Body Drive  Shaft  End  Play Idler Shaft Protrusion Above Body to Cover Face Driven  Gear  and  Driving  Gear  Shaft Protrusion Piston Cooling Nozzle Tube Protrusion  Above  Body  Mounting  Face NEW MINIMUM 0.8767 (22.268) 0.8745 (22.212) 0.8745 (22.212) 0.002 (0.05) 1.035 (26.29) 2.970 (75.44) NEW MAXIMUM 0.8777 0.879 (22.293) (22.33) 0.875 (22.22) 0.875 (22.22) 0.008 (0.020) 0.955 (24.26) 1.055 (26.80) 3.000 76.20) WORN LIMIT 0.873 (22.17) 0.873 (22.17) 0.012 (0.30) TORQUE  LIMITS  –  FT  LB  (N•M) PART  OR  LOCATION Oil  Pump  Mounting  Capscrew Piston  Cooling  Nozzle  Capscrew MINIMUM MAXIMUM 35  (47) 45  (61) 16 (22) 21  (28) 2-441