TM    5-2815-241-34&P FAN    HUB  REMOVAL INITIAL  SETUP Tools Extension,   10-inch,   1/2-inch   drive Handle,   ratchet,   1/2-inch   drive Socket,  9/16-inch,  1/2-inch  drive Socket,  3/4-inch,  1/2-inch  drive ACTION LOCATION ITEM REMARKS 1. Fan  hub  assembly  (1) Three  screws  (2) Using  1/2-inch  drive  3/4-inch  socket  and ratchet  handle,  loosen. 2. Fan hub adjuster screw  (3)  and  two fan  belts  (4) a. Using  1/2-inch  drive  9/16-inch  socket and  ratchet  handle,  loosen. b.    Take off two fan belts and check for cracks. Discard fan belts if defective. 3.  Water  pump  (5) Two  screws  (6)  and two  lockwashers  (7) Using  1/2-inch  drive  3/4-inch  socket,  10- inch  extension,  and  ratchet  handle,  un- screw  and  take  out. Discard   lockwashers. Fan  hub  assembly  (1) Lift off. TASK ENDS HERE TA  242358 2-35