TM 5-3895-360-13
Section Il. UNIT TROUBLESHOOTING
Paragraph
Page
Paragraph Title
Number
Number
4-4.
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-5
4-5.
Explanation of Columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-5
4-6.
Troubleshooting Symptom Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-6
Table 4-2.
Unit Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-6
4-4. GENERAL.
a.
b.
.
c.
d.
This section provides inforrnation for identifying and
correcting malfunctions which may develop while
operating or maintaining the tamper.
The Troubleshooting Symptom Index in paragraph
4-6 lists the common malfunctions which may occur
and refers you to the proper page in Table 4-2 for a
troubleshooting procedure.
This section cannot list all malfunctions that may
occur, nor all probable causes and test procedures/
remedies. If a malfunction is not listed or is not cor-
rected by listed test procedures/remedies, notify
your supervisor.
When troubleshooting a malfunction:
(1)
(2)
Question the operator to obtain any information
that might help determine the cause of the prob-
lem. Before continuing, ensure that all applica-
ble operator/crew troubleshooting was
performed.
Locate the symptom or symptoms in para-
graph 4-6 that best describes the malfunction. If
appropriate symptom is not listed, notify your
supervisor.
(3) Turn to the page in Table 4-2 where trouble-
shooting procedure for the malfunction in
question is described. Headings at the top of
each page show how each troubleshooting
procedure is organized: Problem, Probable
Cause, and Test Procedure/Remedy.
(4) Perform each step in order listed until the
malfunction is corrected. Do not perform any
maintenance task unless the troubleshooting
procedure tells you to do so.
4-5. EXPLANATION OF COLUMNS.
The columns in Table 4-2 are defined as follows:
(1) Problem. A visual or operational indication that
something is wrong with the tamper,
(2) Probable Cause. A list of the system or com-
ponent likely to be causing the problem.
(3) Test Procedure/Remedy. A procedure to iso-
late and correct the problem.
4-5
|
|
