TM   5-3895-360-13 7-4.  AIR  CLEANER  MAINTENANCE  (VR11)  (Con’t). WARNING Dry  cleaning  solvent,  P-D-680,  Is  toxic  and flammable.  Always  wear  protective  goggles and gloves, and use only in a well-ventilated area.  Avoid  contact  with  skin,  eyes,  and clothes, and DO NOT breathe vapors. DO NOT use  near  open  flame  or  excessive  heat.  The solvent’s flash point is 100°F-138°F (38°C-59°C). if you become dizzy while using cleaning solvent, immediately get fresh air and medical help. if solvent contacts eyes, immedi- ately wash your eyes and get medical aid. b. Clean filter pin (1), retainer (2), and filter housing (4) with dry cleaning solvent (Item 16, Appendix E) and allow to dry. c. Install filter pin (1) and filter (3) in filter housing (4). AIR  CLEANER  REMOVAL NOTE Refer to Figure 7-6, Air Cleaner Replacement (VR11),  for steps a and b. a. Remove air cleaner filter. b. Remove filter housing (4) from carburetor (5). AIR CLEANER INSTALLATION a. b. NOTE Refer to Figure 7-6, AIr Cleaner Replacement (VR11),  for steps a and b. install filter housing (4) on carburetor (5). Install air cleaner filter. Figure 7-6. Air Cleaner Replacement (VR11). Figure 7-5. Air Cleaner Filter Replacement   (VR11). 7-6