TM 9-2520-272-34&P
4-17.
REMOVE TRANSMISSION FROM MAINTENANCE STAND
(SHEET 3 OF 7)
4 Install 3/8 inch flat washer (10) under head of 3/8-16 x
1-3/4 inch bolt (11), put bolt through sling lug and
install another 3/8 inch flat washer (12) on bolt.
5 Using 9/16 inch socket, install bolt (11) attaching
three-leg sling to input housing (3). Tighten bolt to
snug.
6 Install 3/8 inch flat washer (13) under head of 3/8-16 x
1-3/4 inch bolt (14). Put bolt through sling and lug and
install another 3/8 inch flat washer (15) on bolt.
7 Using 9/16 inch socket, install bolt (14) attaching
three-leg sling to left end cover (6). Tighten bolt to
snug.
8 Install 3/8 inch flat washer (16) under head of 3/8-16 x
1-3/4 inch bolt (17), put bolt through sling lug and
install another 3/8 inch flat washer (18) on bolt.
9 Using 9/16 inch socket, install bolt (17) attaching
three-leg sling to right end cover (9). Tighten bolt to
snug.
Go to Sheet 4
Para. 4-17, Task 1
4-75
|
|
