TM 9-2520-272-34&P 4-20. REPAIR RIGHT END COVER COMPONENTS (SHEET 8 OF 14) WARNING Frozen  parts  can  stick  to  your  fingers  and  cause  serious  injury.      Always  wear  leather gloves when working with parts that have been frozen in dry ice. 27 Place bearing races (5, 6) in dry ice for 1 hour. 28 Using arbor press, install races (5, 6) in support (2).   Press races to shoulder. FOLLOW-ON PROCEDURE: Install right brake support.   Refer to paragraph 4-21. End of Task 4 TASK 5.   REPAIR RIGHT END COVER ASSEMBLY COMMON TOOLS: Adapter, socket wrench, 1/2 inch to 3/8 inch square drive Drill, electric, portable, 115 volt, 3/8 inch chuck Drill, twist, 3/4 inch diameter flute, 3/8 inch diameter shank Drill, twist, 1/4 inch diameter, straight shank (pilot drill for above) Extension, socket wrench, 3/8 inch square drive, 6 inch Gloves, leather Gun, heat (2 required) Hammer, hand, ball peen Handle, socket wrench, 3/8 inch square drive Pliers, diagonal cutting Pliers, wrench Press, arbor, hand operated Pry Bar, roller head (2 required) Puller, bearing or gear, mechanical Puller, mechanical, slide hammer type Punch, center, tapered end Punch, drive pin, straight Rotary Tool Kit, electric (grinder) Socket, socket wrench, 3/8 inch square drive, 11/16 inch Socket Wrench Attachment, socket head screw, 3/8 inch square drive, 3/16 inch hex plug end Socket Wrench Attachment, socket head screw, 3/8 inch square drive, 5/16 inch hex plug end Socket Wrench Attachment, socket head screw, 3/8 inch square drive, 1/4 inch hex plug end Wrench, combination, 9/16 inch (two required) Wrench, torque, 0-600 in.   lb Wrench, torque, 0-175 ft-lb Hammer, Machinists, 1lb Chisel Go to Sheet 9 Para.   4-20, Task 5 Change 2   4-119