TM 9-2520-272-34&P
4-21.
ASSEMBLEY RIGHT END COVER ASSEMBLY
(SHEET 11 OF 22)
8 Turn support (1) over.
9 Install hook-type metal seal ring (8) onto retainer (9)
NOTE
Petrolatum applied to a hook type seal ring
can reduce the possibility of breakage by
helping the seal ring move into place with
less friction.
10 Coat seal ring (8) with petrolatum.
11 Tip support (1) on edge.
12 Install retainer (9), flat side toward support (1) with
retainer bolt holes (10) and support bolt holes (11)
aligned.
13 Using fingers, start two washers (12) and bolts (13)
into support (1).
14 Using 7/16 inch socket and torque wrench tighten
bolts (13) to 10-12 lb-ft (14-16 N•m).
15 Turn support (1) over and place on wooden blocks.
Go to Sheet 12
4-136
Para. 4-21, Task 4
|
|
