TM   9-2520-272-34&P 4-25. REPAIR   INPUT (SHEET  1  OF  3) OVERVIEW HOUSING   ASSEMBLY Input   housing   assembly   does   not   have   to   be   removed   from   transmission   to   perform   maintenance procedures   provided   in   this   paragraph,   except   for   removal   and   installation   of   flat   aluminum   plug (73342)   23018028.   However,   text   and   illustrations   are   based   upon   input   housing   removed   from transmission Task I Title I Page 1 Repair   Input   Housing   Assembly I 4-160 TASK   1.   REPAIR   INPUT   HOUSING   ASSEMBLY COMMON   TOOLS: Adapter,   socket   wrench   1/2   to   3/8   inch   ware   drive Extension,   socket   wrench,   1/2   inch   square   drive,   6   inch Hammer,   hand,   ball   peen Handle,   socket   wrench,   1/2   inch   square   drive Press,   arbor,   hand   operated Punch   center Socket,   socket   wrench   1/2   inch   square   drive,   5/8   inch Socket,   socket   wrench,   1/2   inch   square   drive,   9/16   inch Socket   Wrench   Attachment,   socket   head   screw,   3/8   inch   square   drive,   1/4   inch   hex   plug   end Wrench,   torque,   0-175   ft-lb REPAIR   PARTS: Packing,   preformed   (2   required)   (73342)   6832592 SUPPLIES: Block,  wooden,  2  x  4  inches  x  16  inches  long  (2  required)  (Item  2,  Appendix  C) Petrolatum   (Item   14,   Appendix   C) Rag,   wiping   (Item   15,   Appendix   C) Sealant,   lubricating,   thread   locking   (Item   16,   Appendix   C) NOTE Input   housing   is   turned   outside   up. Go  to  Sheet  2 4-160 Para.   4-25,   Task   1