4-25.
REPAIR INPUT HOUSING ASSEMBLY
(SHEET 2 OF 3)
Disassemble Input Housing Assembly
1 Using 5/8 inch socket, remove steering adjustment
access plug (1) and packing (2) from input housing (3).
2 Using 9/16 inch socket, remove pipe plug (4) from
input housing (3).
3 Using 1/4 inch hex plug socket attachment and
adapter, remove pipe plug (5) from input housing (3)..
4 Place two wooden blocks under input housing (3).
If replacement of aluminum plug (6) is required, put
punch into oil cooler-out port (7) so that tip of punch
is against aluminum plug (6).
6 Using punch and hammer, punch plug (6) from input
housing (3.
TM 9-2520-272-34&P
Go to Sheet 3
Para. 425, Task 1
4-161
|
|
