TM 9-2520-272-34&P
4-25.
REPAIR INPUT HOUSING ASSEMBLY
(SHEET 3 OF 3)
Assemble Input Housing Assembly
7 Turn input housing (3) over, inside up.
8 If aluminum plug (6) was removed, install new plug (6)
in input housing (3) using arbor press Press plug flush
to 0.010 inch (0.2540 mm) below surface of input
housing.
9
10
11
12
13
14
15
16
17
18
Turn housing (3) over, outside up.
Apply thread locking compound to threads of two pipe
plugs (4, 5).
Using 1/4 inch hex plug socket attachment and
adapter, install pipe plug (5) in input housing (3).
Using torque wrench and adapter, tighten plug (5) to
8-10 lb-ft (11-14 N•m).
Using 9/16 inch socket, install pipe plug (4) in input
housing (3).
Using torque wrench, tighten plug (4) to 8-10 lb-ft
(11-14 N•m).
Install new packing (2) on steering adjustment access
plug (1).
Apply petrolatum to packing (2).
Using 5/8 inch socket, install plug (1) in input housing
(3).
Using torque wrench, tighten plug (1) to 50-60 lb-ft
(68-81 N•m).
FOLLOW-ON PROCEDURE: Install input housing
assembly. Refer to paragraph 4-13.
End of Task 1
4-162
Para. 4-25, Task 1
|
|
