TM 9-2520-272-34&P
4-28.
DISASSEMBLE CENTER HOUSING
(SHEET 12 OF 19)
1
2
3
4
5
6
Using 9/16 socket, remove bolt (1) that holds
fabricated retaining fixture to center housing (2).
Rotate forward clutch housing assembly (3) so that
of the slotted openings is located over pitot (4).
Using socket head screw attachment, remove two
screws (5), tapping tool lightly with hammer, if
necessary, to loosen screws.
Using needle nose pliers, remove pitot (4).
Remove forward clutch housing assembly (3), wiggling
it to free it, if necessary.
REPAIR: Refer to paragraph 4-29 for repair of
forward clutch housing assembly (3).
Remove thrust washer bearing (6).
7 Remove fourth and reverse clutch assembly (7).
REPAIR: Refer to paragraph 4-29 for repair of
fourth and reverse clutch assembly (7).
Go to Sheet 13
Para. 4-28, Task 6
4-183
one
|
|
