TM 9-2520-272-34&P 5-3.  BRAKE ADJUSTMENT (SHEET 4 OF 5) TASK 3.  ADJUST RIGHT-HAND BRAKE COMMON TOOLS: Extension,    socket    wrench,    1/2    inch    square drive, 6 inch Handle, socket wrench, 1/2 inch square drive Screwdriver,  flat  tip  Socket,  socket  wrench,  1/2 inch square drive, 1/2 inch Wrench, torque, 0-175 ft-lb SPECIAL TOOLS: Adapter,    splined,    brake    adjustment    (73342) 8355955 MATERIAL/PARTS: Gasket,    brake    adjusting    cover    (1    required) (73342) 23017882 NOTE •  Brake  needs  tightened  if  indicator passes APPLY mark when 40 lb-ft (54 N•m) is applied with torque wrench. •  Brake  needs  loosening  if  indicator does not get to APPLY mark when 40 lb-ft  (54  N-m)  is  applied  with  torque wrench. •    Brake    adjusting    link    should    be turned  only  1/6  turn  (60°)  at  a  time until    proper    brake    adjustment    is achieved. •  X200-4A  Prior  to  removal  of  right adjusting    cover,    note    location    of chain in relation to bolt. 1. Using  1/2  inch  socket,  remove  six  bolts  (1)  and washers  (2)  retaining  RH  brake  adjusting  cover (3). 2. Remove cover (3) and gasket (4). Go to Sheet 5 Para.  5-3, Task 3 Change 2  5-7