TM 9-2520-272-34&P
4-8. REMOVE LEFT END COVER ASSEMBLY (SHEET 3 OF 10)
5.
Equally tighten bolts (5) until oil filter head (2) becomes loose.
6.
Remove two bolts (5) from filter head (2).
7.
Pull filter head (2) and filter (7) from filter cavity on left end cover assembly (1).
8.
Pull filter head (2) and filter (7) apart.
9.
Remove two packings (8) from filter head (2).
FOLLOW-ON PROCEDURE: Install filter head assembly. Refer to paragraph 4-15.
End of Task 2
TASK 3. REMOVE LEFT END COVER ASSEMBLY
COMMON TOOLS:
Extension, socket wrench, 1/2 inch square drive, 10 inch
Handle, socket wrench, 1/2 inch square drive
Hoist, 200-pound minimum capacity
Screwdriver flat tip
Socket, socket wrench, 1/2 inch square drive, 9/16 inch
SPECIAL TOOLS:
Lifting sling, three-leg (19207) 12268036
Go to Sheet 4
Para. 4-8 Task 3
Change 2 4-28.1
|
|
