ARMY TM 9-2805-257-14 AIR  FORCE  TO  38G2-103-2 NAVY NAVFAC P-8-612-14E Section Il. SERVICE UPON RECEIPT Paragraph Page 4-4 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...4-2 4-5 Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...4-2 4-6 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...4-2 4-4. a. b. c. 4-5. 4-6. Inspection. Inspect the equipment for damage incurred during shipment. If the equipment has been damaged, report the  damage  on  SF  Form  364,  Report  of  Discrepancy  (ROD). Check the equipment against the packing slip to see if the shipment incomplete. Report all discrepancies in accordance  with  the  instructions  of  DA  PAM  738-750. Check to see whether the equipment has been modified. Lubrication. Refer to L0 9-2805-257-12 and perform unit level and operator level lubrication on engine. Testing. Perform unit level PMCS, and operator Before (B) PMCS before starting engine. Start engine, para. 2-9, and run for at least 15 minutes. Observe the engine during operation. If any malfunctions arise, troubleshoot  using  table  4-2. Section  Ill.  UNIT  PREVENTIVE  MAINTENANCE  CHECKS  AND  SERVICES  (PMCS) Paragraph Page 4-7 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...4-2 4-8 PMCS Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...4-2 4-7. General. Unit level maintenance PMCS are done to ensure that the engine is in top operating condition. A  comprehensive  PMCS  program  reduces  equipment  downtime  and  increases  the  operational  readiness  of  the engine. 4-8. PMCS Procedures. Unit level PMCS is contained in table 4-1. The numbers in the item No. column show the order in which the check or service should be done. These numbers should be used when recording deficiencies and shortcomings on DA Form 2404, Equipment Inspection and Maintenance Worksheet. The  l in the Interval column indicates when a check or service should be done, as follows: 4-2