Custom Search
 
  
 
ARMY  TM  9-2805-262-14 AIR  FORCE  TO  38G2-90-1 NAVY  NAVFAC  P-8-613-14E WARNING Operation of the equipment presents a noise hazard to personnel in the area. The noise level exceeds the allowable limits for unprotected personnel. Wear ear muffs or ear plugs which  were  fitted  by  a  trained  professional. Serious eye injury can result from the starting rope knot. Wear eye protection when pull starting  engine. f. Wind starter rope (7) clockwise around starter pulley (8) and pull briskly. g. When the engine has started, rotate the choke control lever (3) clockwise until the choke is fully opened, and the engine will continue to run. NOTE It  maybe  necessary  on  models  4A032-1  (serial   nos.  G001001  through  G004004),  -2,  -3, -4 to rotate the throttle control counterclockwise to obtain a smooth  idle. h. Allow engine to warm-up for at least 3 minutes before applying  load. i. On models 4A032-1 (serial nos. G001001 through G004004), -2, -3, -4 after warm-up, move throttle control counterclockwise  to  the  full  governed  position. j. Apply end item load. Refer to End Item Operators Manual.


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business