ARMY TM 9-2805-262-14
AIR FORCE TO 38G2-90-1
NAVY NAVFAC P-8-613-14E
c. Installation. (figure 4-21)
(1)
(2)
(3)
(4)
NOTE
When installing high tension cables on engines equipped with breakerless ignition
system, connect high tension cable to ignition control unit.
Install high tension cable (2) as tagged, on coil cover (8) and tighten connector nut (7).
Install loop clamp (6) on high tension cable (2) and secure with screw (4) and washer (5).
Install high tension cable (2) on spark plug (3) and tighten connector nut (1).
Repeat steps 1 through 3 as necessary for remaining high tension cables.
Figure 4-21. High Tension Cables, Removal and Installation.
4-47
|
|
