TM9-2815-202-34
(8) Slide two rubber connectors (13) and four clamps (12) onto ends of water bypass tube (14).
(9) Install water bypass tube (14) between water pump (15) and thermostat housing cover (25).
Slide rubber connectors (13) onto water pump and thermostat housing; secure with clamps
(12).
(10) Install bolt (6), flatwasher (7), lockwasher (8), and nut(9) securing water bypass clamp (10)
to angle bracket(11). Loosely secure bolt to clamp and angle bracket until front engine lifting
bracket is installed.
(11) Slide rubber connectors (2) and four clamps (1) onto ends of water crossover tube (3).
(12) Install water crossover tube (3) between thermostat housing (4) and water outlet connection
(5). Slide rubber connectors (2) onto thermostat housing and water outlet connection; secure
with clamps (1).
END OF TASK
FOLLOW-ON MAINTENANCE
Para Description
4-7
Install Engine Front Lifting Bracket
4-19
|
|
