TM 9-2815-202-34
4-22. FLYWHEEL ASSEMBLY REPLACEMENT (Cont)
d. Installation
(1) Apply International Compound No. 2 or equivalent to threads and to bolt head contact area
(underside) of all flywheel attaching bolts (5). Threads must be completely filled with
compound and excess removed.
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Insert two guide studs (6) into crankshaft flywheel bolt holes.
Attach flywheel lifting sling (1) to flywheel assembly (2) using two eye bolts (3).
Using chain hoist (4), lift and guide flywheel assembly (2) into flywheel housing (9).
Aline flywheel bolt holes with crankshaft bolt holes marked at removal. Guide flywheel
assembly (2) onto guide studs (6).
Install scuff plate (7) and two bolts (5) 180 degrees apart. Snug bolts to hold scuff plate and
flywheel assembly (2) in place on crankshaft (8).
Remove lifting sling (1) and two eye bolts (3) from flywheel (2).
Remove two guide studs (6). Install remaining six bolts (5) and run in snug.
Using torque wrench, tighten eight bolts
(5) to 50 Ib-ft (68 N-m) torque.
NOTE
(10)
4-74
|
|
