TM9-2815-202-34 4-28.   ENGINE   LOWER   FRONT   COVER   REPLACEMENT This  task  covers: a.  Removal b. Cleaning/Inspection c.   Repair/Replacement d.  Installation INITIAL    SETUP MODELS 7083-7395 7083-7398 TOOLS  AND  SPECIAL  TOOLS General mechanics tool kit (App B, Item 96) Torque wrench (App B, Item 101) Torque wrench (App B, Item 102) Oil seal installer (App B, Item 50) MANDATORY  REPLACEMENT  PARTS 1 Gasket (App F, Item 42) 2 LockWashers (App F, Item 93) 6 Lockwashers (App F, Item 95) 1 Seal (App F, Item 150) EXPENDABLE/DURABLE    SUPPLIES Grease (App C, Item 22) Nonhardening  sealant  (App  C,  Item  38) Crocus cloth (App C, Item 12) EQUIPMENT   CONDITION Para   Description 4-5 Fuel strainer removed 4-20   Oil   pan   removed a.   Removal NOTE Secure  gear  train  in  place  to  prevent  crankshaft  from  turning  when  loosening crankshaft  end  bolt. (1) (2) (3) (4) (5) Remove bolt (1) and washer (2) from front of crankshaft.  Slide end cap (3) off crankshaft. Remove four bolts (4), two bolts (5), six Iockwashers (6), two bolts (7), and two Iockwashers (8) from front lower cover (9). Discard Iockwashers. Strike edges of cover on each side alternately with a soft head hammer to free it from dowels. Pull cover straight off end of crankshaft. 4-101