TM 9-2815-202-34
4-38. CYLINDER HEAD REPAIR (Cont)
e. Assembly
(1)
(2)
(3)
(4)
If necessary, install two bushings (63) in cylinder head bolt holes. Press flush to 0.02 inch
below surface.
Install adaptor bushing (61) and restrictive fitting (62) in front of left cylinder head.
Install elbow (60) to front of left cylinder head or two elbows (60) to front of right cylinder head.
If necessary, install threaded plugs (59) - two in right head or one in left head. Coat cup plug
(58) with gasket cement and install in front of cylinder head.
4-204 C h a n g e 1
|
|
