TM9-2815-202-34
4-38. CYLINDER HEAD REPAIR (Cont)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
Install fuse plug (52) in outboard side of cylinder head. Plug must be flush to 0.16 inch below
surface.
Coat cup plug (51 ) with gasket cement and install in rear of cylinder head.
Install five exhaust manifold studs (50) in outboard side of cylinder head. Torque studs to
25-40 Ib-ft (34-54 N-m).
Install eight water manifold studs (49) in cylinder head. Torque studs to 10-25 Ib-ft
(14-34 N-m).
Install four gaskets (48), four cover plates (47), eight Iockwashers (46), and eight nuts (45) to
cylinder head. Torque nuts to 20-25 Ib-ft (27-34 N-m).
Install eight washers (44) and eight fuel connectors (4) to cylinder head. Torque connectors
to 40-45 Ib-ft (54-61 N-m).
Install gasket (43), adaptor (42), two flat washers (41), and two bolts (40) to front inboard
corner of cylinder head. Torque bolts to 7-9 Ib-ft (10-12 N-m).
4-206C h a n g e 1
|
|
