TM9-2815-202-34
(2) Remove retaining ring (5) and two washers (6) from stop lever shaft (7).
(3) Remove stop lever shaft (7) and return spring (8) from governor cover (2).
(4) Remove seal ring (9) from governor cover (2). Discard seal ring.
(5) Remove spacer (10), retaining ring (11 ), and two washers (12) from speed control shaft (13).
(6) Remove speed control shaft (13) from governor cover (2).
(7) Remove seal ring (14) from governor cover (2). Discard seal ring.
(8) Support governor cover (2) on wooden blocks in an arbor press, top facing down.
(9) Using bushing remover tool (15), remove two control shaft bushings (16) from governor
cover (2).
4-249
|
|
