TM 9-2815-202-34
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3.
ENGINE ROTATES BUT FAILS TO START (Cont)
Step 5.
Step 6.
Step 7.
Step 8.
Check fuel grade.
a. Check source of supply to determine fuel being used.
b. Refer to applicable vehicle LO for proper grade of fuel.
Check fuel lines, fittings, and fuel filters for leaks, loose connections, bends, dents,
or kinks.
a. Tighten loose connections and fittings.
b. Repair or replace damaged fuel lines and filters as required.
Check for binding of governor to injector linkage that would prevent positioning of
injector racks to FULL FUEL position.
a. Correct binding linkage.
b. Readjust governor and injector controls (Refer to Para 8-7).
Check condition of blower drive shaft and coupling.
Replace damaged parts (Refer to Paragraphs 4-16, 5-15, or 5.1-15 for
appropriate engine model).
END OF TEST
Change 1
2-5
|
|
