(4) (5) (6) (7) (8) (9) (10) (11) (12) Pull  damper  assembly  (5)  and  outer cone (6) until cone is loose on crankshaft. Remove  universal  puller  (3)  from damper hub (4). Remove bolt (1) from crankshaft. Slide outer cone (6), damper assembly (5), and inner cone (7) from end of crankshaft by hand. Remove six bolts (8) and six Iockwashers  (9);  then,  separate damper (10) from hub (4). Discard Iockwashers. Remove four bolts (11), two bolts (12), six Iockwashers (13), two bolts (14), and two Iockwashers (15) from  lower front  cover  (16).  Discard  Iockwashers, Strike  edges  of  cover  (16)  alternately on each side with a soft-head hammer to free it from dowels. Pull cover straight off end of crankshaft. Remove dirt deflector (17) from end of crankshaft. Remove  gasket  (18)  from  cylinder TM9-2815-202-34 block.  Discard  gasket. ---- 5-29