TM 9-2815-202-34
(4) Drive seal (19) into front cover (16)
with seal installer tool (20).
(5) Remove any excess sealant.
d. Installation
(1)
(2)
(3)
(4)
(5)
(6)
Affix gasket (18) to inner face of front
cover (16).
Position dirt deflector (17) onto
crankshaft with flat surface toward
engine.
Coat lip of oil seal lightly with grease
or vegetable shortening.
Position front cover (16) over two
alinement pins (21) and tap cover
until it contacts cylinder block.
Install four bolts (11), two bolts (12),
six lockwashers (13), two bolts (14),
and two Iockwashers (15) to lower
front cover (16).
Torque bolts (14) to 25-30 Ib-ft
(34-41 N-m) and bolts (11 and 12) to
80-90 Ib-ft (108-122 N-m).
5-31
|
|
