TM 9-2815-202-34
5.1-4. FUEL LINES REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
MODELS
TOOLS AND SPECIAL TOOLS
7083-7391
General Mechanics Tool Set (App B, Item 96)
Torque wrench (App B, Item 100)
Torque wrench (App B, Item 101)
a. Removal
(1)
(2)
Remove bolt (1) and flat washer (2) securing fuel supply line clip (3) to front of governor cover
(4). Reinstall bolt and flat washer in governor cover.
Disconnect fuel supply line (5) at elbow (6) on front of left cylinder head.
(3)
(4)
(5)
5-78
Remove nut (7), Iockwasher (8), flat washer (9), and bolt (10) securing fuel supply line clamp
(11 ) at right side rear of front cover and remove fuel line. Reinstall bolt, flat washer, Iockwasher
and nut in front cover.
If necessary, remove clamp (11 ), clip (3), and coupling (12) from fuel supply line (5).
Remove bolt (13) and flat washer (14) attaching fuel crossover line clip (15) to front of governor
cover (4). Reinstall bolt and flat washer in governor cover. If necessary remove clip from
crossover line.
Change 1
|
|
