T M     9 - 2 8 1 5 - 2 0 2 - 34 3-4.  ENGINE   FROM/TO   CONTAINER   -   10909159/109231080* (Cont) (4) (5) (6) (7) (8) WARNING Never  crawl  under  equipment when  performing  maintenance unless  equipment  is  securely blocked.  Keep  clear  of equipment when it is being raised  or  lowered.  Do  not allow heavy components to swing  while  suspended  by lifting  device.  Exercise extreme  caution  when  working near  a  cable  or  chain  under tension. Equipment may drop or shift and injury to personnel may result. NOTE Use the three-legged sling to lift engine  models  7083-7395  and 7083-7398.  Use  the  four-legged sling to lift engine models 7083- 7396  and  7083-7399 Lower engine into container, using a multi-leg sling (29). Aline the mounting brackets with the holes in the container rail. Fasten the rear mounting bracket (20), to underside of container rail (21 ) with four bolts(15) and four bevel washers (16). On upper side, secure with four flat washers (17), four Iockwashers (18), and four nuts (19). Fasten  the  front  U-shaped  mounting bracket (13), to underside of container rail (14) with two bolts (8), and two bevel washers (9). On upper side, secure with two flat washers (10), two Iockwashers(11),  and  two  nuts  (12). On  models  7083-7396  and  7083- 7399  only,  secure  side  mounting bracket (27), to container rail (28), with two bolts (22), two flat washers (23), two bevel washers (24) two Iockwashers (25), and two nuts (26). 3 - 2 4