TM  9-2815-202-34 3-13.   TURBOCHARGER   OIL   SUPPLY   LINE   REMOVAL/lNSTALLATION (MODEL   7083-7399) This  task  covers: a.  Removal b. Installation INITIAL    SETUP MODELS MANDATORY   REPLACEMENT   PARTS 7083-7399 3  Lockwashers  (App  F,  Item  93) TOOLS  AND  SPECIAL  TOOLS General mechanics tool kit (App B, Item 96) Torque wrench (App B, Item 101) a.   Removal (1) (2) (3) (4) Disconnect  turbocharger  oil  supply  line  (1)  at  turbocharger  connector  (2)  and  at  elbow connector (3) on left rear of engine block. Remove two bolts (4) and two Iockwashers (5) securing oil supply line clips (6) to turbocharger  housing.  Discard  Iockwashers.  Reinstall  two  bolts  and  two  Iockwashers. Remove bolt (7), Iockwasher (8), and flat washer (9), securing oil supply line clip (10) to left side  of  engine  block.  Discard  Iockwasher. Remove  turbocharger  oil  supply  line  (1)  with  clips  attached. b.   Installation (1) (2) (3) (4) Connect  turbocharger  oil  supply  line (1) to turbocharger connector (2) and engine  block  connector  (3). Secure oil supply line clip (10) to left side of engine block with bolt (7), Iockwasher (8), and flat washer (9). Tighten  bolt. Remove two bolts (4) and two Iockwashers  (5)  from  turbocharger housing  and  secure  oil  supply  line clips (6) with two bolts and two Iockwashers.  Torque  bolts  to  150-200 lb-in  (17-22.6  N-m). Tighten  hose  fittings  at  connectors (2 and 3). END   OF   TASK 3-38