| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
THREADED INSERT REPLACEMENT
0030 00
INSTALLATION
1. Put new lock-ring insert (4) on drive
wrench (12).
2. Install lock-ring insert (4).
a. Coat outside threads of insert (4) with
12
sealant compound (item 30,
b. Using drive wrench (12), screw
insert (4) into component (8) threads.
3. Position new lock-ring (6) on insert (4).
a. Align serrations of insert (4) with
4
serrations of lock-ring (6).
CAUTION
Do not allow drive tool to contact
component. Any impact of pressure
on component surface may damage
8
component threads. Damage to
equipment can occur.
4. Install new lock-ring (6).
6
a. Position drive tool (13) in lock-
ring (6) on insert (4).
b. Using hammer, strike top of drive
4
tool (13) until lock-ring (6) is in
position.
5. Inspect new lock-ring (6) for damage.
13
a. If lock-ring (6) is not in position or is
damaged, go to Removal, step 4.
6
6. Clean new lock-ring (6), insert (4), and
related component.
4
7. Go to End of Work Package.
WP 0030 00-4
|
||
|
||
