| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
THREADED INSERT REPLACEMENT
0030 00
INSTALLATION (Continued)
8. Put new oversize or standard insert (1) on
drive wrench (3).
3
9. Install new oversize or standard
insert (1).
a. Coat outside threads of insert (1) with
sealant compound (item 30,
b. Using ratchet handle and drive
wrench (3), screw insert (1) into
threaded hole (A) in component (8).
1
10. Prepare oversize or standard insert swage
tool (14) (item 122, WP 0176).
a. Determine proper insert swage
tool (14) and swage tool stop (15)
3
depth.
b. Install swage tool stop (15) on swage
1
tool (14).
A
11. Lock insert (1) in place.
a. Put swage tool (14) into insert (1).
b. Using hammer, strike top of swage
14
tool (14) until swage tool stop (15)
bottoms on component (8). Remove
tool.
15
c. Inspect new insert (1) for damage
during installation. If damaged, go to
Removal, step 1.
12. Clean all new inserts and related
14
15
components.
a. Clean assembly and hardware
1
8
END OF WORK PACKAGE
WP 0030 00-5 (6 blank)
|
||
|
||
