| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FUEL/WATER SEPARATOR OPERATION TESTS
0042 00
AFTER TESTS
1. Disconnect black wire (24) and red wire (23) from positive (+) and negative (-) terminals of
24-volt dc power source.
2. Disconnect fuel/water separator test harness connector (22) from fuel/water separator control
unit (20).
3. Disconnect jumper wire (21) from negative (-) side of 24 V dc power source and from metal
container.
4. Remove metal container from under automatic drain valve (13) tube (18).
5. Connect engine electrical harness (19) connector to fuel/water separator control unit (20).
22
19
20
24
23
18
13
21
WATER
FUEL
WP 0042 00-9
|
||
|
||
