| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
OIL LEVEL GAUGE ROD REPLACEMENT/REPAIR
0076 00
ASSEMBLY (Continued)
13
4. Install oil level indicator tube neck (13).
a. Position new gasket (16) (item 192, WP
16
17
b. Insert neck (13) through cover (1) and
secure with two cap screws (14) using
two new lock washers (15) (item 93,
1
c. Using Lubriplate (item 23, WP 0173),
lubricate and install two new
O-rings (17) (item 149, WP 0175) on
neck (13).
15
INSTALLATION
14
NOTE
Engine models 2CA and 2DA locate the oil
level tube between cylinders 1 and 2 left side.
Engine model 2DR locates the oil level tube
between cylinders 2 and 3 left side.
Removal/installation procedures are identical.
1. Install oil level indicator tube (5).
a. Position new gasket (12) (item 288,
b. Install oil level indicator tube (5).
10
c. Secure with three new self-locking
nuts (11) (item 33, WP 0175).
6, 7
d. Install air baffles (8, 9).
(four
e. Secure with four cap screws (6) using
places)
new lock washers (7) (item 85,
8
f. Connect fuel return hose (10).
5
9
5
11
12
WP 0076 00-5
|
||
|
||
