| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FLYWHEEL AND ADAPTER REPLACEMENT (2DR)
0103 00
REMOVAL
1. Position flywheel (4) for removal.
a. Rotate PTO shaft (2) with turning tool (3).
b. Position flywheel (4) so that lifting eyebolt hole (A) is at top center.
A
4
2
3
2. Install eyebolt (5) (item 11, WP 0176) and attach hoist (6).
6
3. Remove eight screws (7) from flywheel (4).
5
4
NOTE
Early model engines had safety
wire securing the flywheel
7
fasteners. Remove and discard the
wire and do not safety wire upon
reinstallation. Instead, increase
the torque of the fastener to
1300-1350 inch-pounds
(146.8-152.5 Nm).
WP 0103 00-2
|
||
|
||
