| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
ROCKER ARM ASSEMBLY AND COVER REPLACEMENT
0104 00
INSTALLATION (Continued)
14. Install upper access cover (1).
a. Place new gasket (5) (item 350, WP 0175) into position followed by access cover (1) and
fuel injection clamp spacer plate (4).
b. Secure using two screws (2) with flat washers (3).
c. Torque screws (2) to 150-175 inch-pounds (17-19.8 Nm) (using item 124, WP 0176).
2. Install lower access cover (1).
a. Place new gasket (5) (item 350, WP 0175) into position followed by access cover (1).
b. Secure using two screws (2) with flat washers (3).
c. Torque screws (2) to 150-175 inch-pounds (17-19.8 Nm) (using item 124, WP 0176).
2
3
4
1
5
2
3
1
5
END OF WORK PACKAGE
WP 0104 00-16
|
||
|
||
