| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
0107 00
INSTALLATION
1. If removed, apply anti-seize compound (item 5, WP 0173) to three new pipe plugs (52) and
install in exhaust manifold (38).
2. Install elbow (39) to manifold (38).
a. Install elbow (39) to manifold (38) with a new a new gasket (51) (item 363, WP 0175) in
position.
b. Secure using four screws (50) and new self-locking nuts (49) (item 161, WP 0175).
3. Install 4-5-6 left exhaust manifold (38) and elbow (39) as an assembly.
a. Install three new gaskets (47) (item 363, WP 0175) onto cylinders 4-5-6 left and put
manifold (38) into position.
b. Install new gasket (48) (item 327, WP 0175) and secure with manifold (38) to turbocharger
using two new self-locking nuts (40) (item 161, WP 0175) and screws (39). Do not tighten
self-locking nuts (40) at this time.
c. Secure manifold (38) to cylinders 4-5-6 left with twelve new self-locking nuts (42)
(item 161, WP 0175). Torque-tighten nuts (42) to 275 inch-pounds (31 Nm), using torque
wrench (item 125, WP 0176).
4. Install plate (45) on studs (46) with two new self-locking nuts (43) (item 140, WP 0175) and
flat washers (44).
47
42
40
38
48
52
43
39
44
45
41
46
49
51
50
WP 0107 00-9
|
||
|
||
