| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
PTO COUPLING/FUEL PUMP DRIVE HOUSING REPAIR (2DR ONLY)
0111 00
REMOVAL (Continued)
4. Remove PTO drive coupling (4).
a. Position holding bar/puller tool (3) on PTO drive coupling (4) with boss against gear shaft,
and secure with two 7/16-20 x l-l/2-inch cap screws (5).
b. Alternately tighten the two cap screws (5) to remove (pull) the PTO drive coupling (4).
c. Remove holding bar/puller tool (3).
5. Remove PTO housing (8).
a. Remove eight self-locking nuts (9) with flat washers (10). Discard self-locking nuts.
b. Remove fuel hose clamps (11).
c. Remove PTO drive housing (8). Use two mechanical pullers if necessary to assist in
housing removal.
d. Remove and discard mounting gasket (12) (hidden).
6. Remove 45 elbow (2) from housing (8).
9,10 (Eight Places)
11
5 (Two Places)
4
2
8,12
3
WP 0111 00-3
|
||
|
||
