| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
PTO COUPLING/FUEL PUMP DRIVE HOUSING REPAIR (2DR ONLY)
0111 00
REMOVAL
1. Disconnect oil inlet hose (1) at 45-degree elbow (2).
2. Install holding bar/puller tool (3) (item 64, WP 0176).
a. Position holding bar/puller tool (3) on power takeoff drive (PTO) coupling (4) as shown.
b. Secure with two 7/16-20 x 1-1/2 inch cap screws (5) from PTO coupling.
3. Remove PTO drive coupling (4) self locking nut (6).
a. Secure holding bar/puller tool (3) to prevent PTO drive coupling (4) from turning.
b. Remove self-locking nut (6) and flat washer (7). Discard self-locking nut.
c. Remove holding bar/puller tool (3).
6
1
4
2
7
3
5
WP 0111 00-2
|
||
|
||
