| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
THROTTLE CONTROL AND MANUAL FUEL SHUTOFF (2CA, 2DA)
0122 00
REPAIR
1. Replace loose, bent, or damaged pins (45, 47, and 48) from throttle lever (8), throttle lock
lever (30) and governor control lever (42) respectively. Refer to WP 0028.
2. Replace sleeve bearings (46).
a. Remove and discard two sleeve bearings (46) in fuel shutoff lever assembly (23).
b. Install two new sleeve bearings (46) in fuel shutoff lever assembly (23).
NOTE
Sleeve bearings must be installed 0.250 inch (6.35 mm) inboard of end
surface of lever.
c. Ream two sleeve bearings (46) to a diameter of 0.6270-0.6290 inch (15.926-15.977 mm),
using reamer (item 92, WP 0176).
8
42
45
48
47
30
23
46
46
WP 0122 00-8
|
||
|
||
