| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
OIL SEAL HOUSING ASSEMBLY AND ASSOCIATED PARTS
REPLACEMENT
0136 00
INSTALLATION (Continued)
1. Install oil seal (12) (item 365, WP 0175) onto
crankshaft (13) (continued).
A
e. Apply silicone compound (item 34,
f. Apply a coating of silicone compound
(item 34, WP 0173) around lip and
outer surface of oil seal (12).
12
g. Make sure that ends (A) of oil seal (12)
13
join approximately 30 degrees from
centerline of crankshaft (13).
2. Install new gasket (11) (item 348, WP 0175).
3. Install housing (4) and cap (3).
a. Apply a 1/4-inch bead of sealant (item 33, WP 0173) to oil seal housing (4) where it mates
with oil seal cap (3).
b. Install oil seal housing (4) and cap (3) over crankshaft seal (12) and onto dowel pins (10).
c. Slide housing (4), cap (3), and seal (12) as an assembly onto dowel pins (9).
9
3
12
9
10
11
4
WP 0136 00-6
|
||
|
||
