| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
CRANKSHAFT REPLACE/REPAIR
0139 00
INSPECTION (Continued)
3. Check dowel pins (16, 26).
a. Insure that dowel pins (16, 26) are secure in crankshaft flanges, are not out of round, and
are not bent.
b. Measure diameter of (two) dowel pins (16). Mark for repair if not within specifications in
the following table.
Outside Diameter of Dowel Pins (Flywheel End)
Minimum
Maximum
Standard
0.6255
0.6257
0.005 oversize
0.6305
0.6307
0.010 oversize
0.6355
0.6357
c. Measure diameter of dowel pin (26). Mark for repair if not within specifications in the
following table.
Outside Diameter of Dowel Pin (Damper End)
Minimum
Maximum
Standard
0.5001
0.5003
16
26
WP 0139 00-11
|
||
|
||
