| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
ACCESSORY DRIVE GEAR REPLACEMENT
0141 00
REMOVAL (Continued)
2. Remove accessory drive gear (7).
a. Remove and discard lock wire (8).
b. Remove 12 screws (9).
8
c. Remove gear (7).
7
CLEANING
9
1. See Work Package 0028 for Standard
Cleaning Procedures.
INSPECTION
All parts must be inspected with care. Replace parts if damage or if wear exceeds allowable
limits.
1. See Work Package 0028 for Standard Inspection Procedures.
2. Measure accessory drive gear (7) and replace if it does not meet the following limits:
Location
Sizes and Fits of New Parts
Wear Limits
inches (mm)
A (Outside diameter of
9.7480 (247.5992)
9.7495 (247.6373)
9.7470 (247.5738)
mounting flange on crankshaft)
B (Inside diameter of pilot bore 9.7500 (247.65)
9.7520 (247.7008)
9.7530 (247.7262)
in accessory drive gear)
B
A
WP 0141 00-3
|
||
|
||
