| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
ACCESSORY DRIVE GEAR REPLACEMENT
0141 00
INSTALLATION
1. Install accessory drive gear (7).
a. Position gear (7) on crankshaft (10).
b. Apply lubricant (item 23, WP 0173) to
threads of 12 screws (9).
c. Install and alternately tighten 12
8
screws (9) to secure gear (7) onto
crankshaft (10).
7
d. Alternately torque-tighten 12 screws (9)
9
to 52 foot-pounds (71 Nm).
10
e. Secure screws (9) with new
lock wire (8) (item 44, WP 0173).
2. Install oil seal housing support (1).
a. Apply a bead of RTV sealant (item 33,
where it mates with crankcase (4).
b. Install oil seal housing support (1) on
3
2
dowel pins (5).
c. Secure oil seal housing support (1) to
crankcase (4) using four screws (2) with
1
flat washers (3).
5
4
d. Apply RTV sealant (item 33, WP 0173) into the openings at the crankcase and support
parting line.
RTV Sealant (4 places)
WP 0141 00-4
|
||
|
||
