| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
ACCESSORY DRIVE HOUSING REPLACE/REPAIR
0158 00
INSPECTION (Continued)
6. Measure inside diameter (A) of small through bore in housing (8). Replace housing if not
within specifications in the following table.
7. Measure inside diameter (B) of small lower bore in housing (8). Replace housing if not within
specifications in the following table.
8. Measure inside diameter (C) of large lower bearing bore in housing (8). Replace housing if
not within specifications in the following table.
9. Measure inside diameter (D) of oil seal bore in housing (8). Replace housing if not within
specifications in the following table.
Location
Sizes and Fit of New Parts
Wear Limits
inches (mm)
A (Through bore)
1.1440 (29.0576)
1.1460 (29.1084)
1.1470 (29.1338)
B (Lower bore)
2.6772 (68.0009)
2.6779 (68.0187)
2.6784 (68.0314)
C (Large lower bore)
3.1496 (79.9999)
3.1503 (80.0176)
3.1508 (80.0303)
D (Oil seal bore)
1.7510 (44.3255)
1.7510 (44.3255)
None
8
D
C
B A
WP 0158 00-11
|
||
|
||
