TM 9-2815-225-34&P 3-44. OIL PUMP REPAIR (Contd) LOCATION/ITEM ACTION REMARKS a.  Disassembly (Contd) 5. Gear (14) Remove from shaft (27). Lift gear off shaft (27). 6. Shaft (11) and oil pumping Remove from body (7). Use suitable arbor press. gear (12) 7. Shaft (11) Remove from oil pumping gear Use suitable arbor press. (12). 8. Shaft (27) Remove from body (7). Use suitable arbor press. 9. Connector (17) and pipe Remove from housing (16) and plug (6) body (7). WARNING Remove  pressure  regulator  assembly  slowly  to  prevent  spring  tension  from  shooting regulator assembly from oil pump body.  Wear eye protection.  Failure to comply may result in damage to equipment or injury to personnel. 10. Screw (1), lockplate (2), Remove from body (7). retaining yoke (3), spring (4), and plunger (5) 3-248