TM 9-2815-225-34&P 3-44. OIL PUMP REPAIR (Contd) LOCATION/ITEM ACTION REMARKS a.  Disassembly (Contd) 11. Retaining ring (42) and Remove from shaft (36). steering pump coupling (43) 12. Gear (54) and woodruff Remove from shaft (36).   Use a suitable gear puller. key (34) 13. Seven captive washer Remove from pin (35) and body Use a soft-nose hammer to loosen screws (44), cover (40), (29). cover (40).  Discard gasket (39). and gasket (39) 14. Gear (46) Remove from shaft (47). Lift gear (46) off shaft (47). 15. Shaft (36) and gear (37) Remove from body (29). Use suitable arbor press. 16. Shaft (36) Remove from gear (37). Use suitable arbor press. 17. Shaft (47) Remove from body (29). WARNING Remove   pressure   regulator   assembly   slowly   to   prevent   spring   tension   from   shooting assembly  from  oil  pump  body.    Wear  eye  protection.    Failure  to  comply  may  result  in damage to equipment or injury to personnel. 18. Screw (53), washer (52), Remove from body (29).   Discard preformed packings (50). retainer (51), two preformed packings (50), spring (49), and plunger (48) 3-250