TM 9-2815-225-34&P 3-44. OIL PUMP REPAIR (Contd) LOCATION/ITEM ACTION REMARKS d.  Assembly (Contd) 48. New gasket (39) and Install on dowel pin (35) and It may be necessary to tap on the cover (40) body (29). cover (40) lightly with a soft-nose hammer to seat cover on dowel pin (35). 49. Seven captive washer Install on cover (40) and body (29). Tighten captive washer screws screws (44) (44) to 35 lb-ft (48 Nm).  Rotate shaft (36) to ensure gears turn free. 50.     Plunger (48), spring (49), Install on body (29). Tighten screw (53) to 35 lb-ft two new preformed packings (48 Nm).  Be certain pressure (50), retainer (51), washer regulator plunger (48) slides (52), and screw (53) freely within bore.  Rotate shaft (36) and check end play to ensure it is within 0.002 in. (0.051 mm) minimum and 0.005 in. (0.127 mm) maximum range. 51. Pipe plug (41) Install on cover (40).   Tighten pipe plug (41) to 30 lb-ft (41 Nm).  Coat threads with liquid thread sealant. 52. Steering pump coupling Install on shaft (36). (43) and retaining ring (42) FOLLOW-ON TASK:  Install oil pump (para. 3-74). 3-262